Pipe Welder
Share
Job Location:
Monthly Salary:
Experience Required:
Posted on:
2 hours ago
Vacancies:
1 Vacancy
Job Summary
Job Summary
The Pipe Welder will perform high-quality welding on a variety of pipe materials including stainless steel chromes Inconel carbon and copper nickel using GTAW and SMAW processes. Responsibilities include welding in multiple positions adhering to industry standards and ensuring compliance with safety and quality requirements in a dynamic construction environment.
Responsibilities
- Perform 100% x-ray quality welds on chromes stainless Inconel carbon nickel copper and copper nickel using GTAW (TIG) process.
- Weld in flat vertical horizontal and overhead positions; perform tack welding heat bending grinding and clamping.
- Plan layout and install pipe and tubular components according to plans specifications and welding codes.
- Use hand and power tools (e.g. cutting torches files) to measure cut assemble and weld structural steel components.
- Install supports valves and control equipment; test systems and ensure compliance with specifications.
- Assist with joint fit-up alignment and rigging/lifting as needed.
- Set up and operate welding equipment including adjusting gas flow and pressure for proper flame control.
- Work in confined spaces with exposure to extreme temperatures chemicals and radiation.
- Follow lockout/tag out procedures and adhere to all site safety and operational protocols.
- Read and interpret plans drawings (orthographic isometric) and specifications; visualize 2D drawings in 3D.
- Complete quality audits and ensure all welds meet required standards.
- Attend site-specific training and follow all established procedures.
- Perform all other duties as assigned by supervisor.
Requirements
Required Qualifications
- At least five years of pipe welding experience in an industrial or shipyard environment.
- Must pass a welding test on specific procedures and welding codes (e.g. MIL-82H MIL-MS-2 MIL-RN82H).
- Strong working knowledge of pipe welding codes specifications and industry standards.
- Proficiency in GTAW (TIG) and SMAW (STICK) welding including 6G position welding.
- Knowledge of carbon steel stainless steel copper nickel nickel copper and Inconel alloys.
- Ability to understand and follow detailed instructions and work procedures.
Preferred Qualifications
- Experience with EB ring consumable inserts.
- Experience in submarine piping is a plus.
Successful candidate must possess the willingness and ability to complete and pass all pre-employment and employment screening requirements which may include but are not limited to: Practical skills COVID-19 other medical psychological (if required by site) background and substance abuse screening(s).
Weld Test Requirements:
- GTAW welding of 1 Inconel butt weld with MIL-82H consumable insert ring and MIL-RN82H filler wire.
- GTAW welding of 1 carbon steel butt weld with MIL-MS-2 consumable insert ring and ER70S-3 filler wire.
- GTAW welding of 2 - CRES socket welds (4F/5F positions) with MIL-RN82H Inconel filler wire.
- GTAW welding of 2 - carbon steel socket welds (4F/5F positions) with ER70S-3 filler wire.
- All tests are restricted in accordance with NAVSEA Technical Publication S9074-AQ-GIB-010/248 Figure 21.
Physical Requirements:
* Lift and carry heavy items weighing up to 50 pounds.
* Stand Kneel Bend Stoop move in and around confined and cluttered places and uneven areas see and hear naturally or with correction.
* Full range of motion and flexibility consistent with requirements of the job duties.
* Requires using hands to handle control or feel objects tools or controls according to a set procedure.
* Requires repetitive movement.
* Climb and maintain balance on steel framework stairs ladders and scaffolds.
* Work up to a 12-hour shift doing hard physical labor in varying temperature extremes and other outside conditions.
Work Environment:
* Typical construction site environment
* Requires working in cramped workspaces and getting into awkward positions.
* Requires working in very hot (above 90 F degrees) or very cold (below 32F degrees) temperatures and exposure to inclement weather such as dust wind snow rain etc.
* Requires working in extremely bright or inadequate lighting conditions
* Includes exposure to sounds and noise levels that are distracting or uncomfortable.
* Work around hazardous equipment.
Required Skills:
Required Qualifications At least five years of pipe welding experience in an industrial or shipyard environment. Must pass a welding test on specific procedures and welding codes (e.g. MIL-82H MIL-MS-2 MIL-RN82H). Strong working knowledge of pipe welding codes specifications and industry standards. Proficiency in GTAW (TIG) and SMAW (STICK) welding including 6G position welding. Knowledge of carbon steel stainless steel copper nickel nickel copper and Inconel alloys. Ability to understand and follow detailed instructions and work procedures. Preferred Qualifications Experience with EB ring consumable inserts. Experience in submarine piping is a plus. Successful candidate must possess the willingness and ability to complete and pass all pre-employment and employment screening requirements which may include but are not limited to: Practical skills COVID-19 other medical psychological (if required by site) background and substance abuse screening(s). Weld Test Requirements: GTAW welding of 1 Inconel butt weld with MIL-82H consumable insert ring and MIL-RN82H filler wire. GTAW welding of 1 carbon steel butt weld with MIL-MS-2 consumable insert ring and ER70S-3 filler wire. GTAW welding of 2 - CRES socket welds (4F/5F positions) with MIL-RN82H Inconel filler wire. GTAW welding of 2 - carbon steel socket welds (4F/5F positions) with ER70S-3 filler wire. All tests are restricted in accordance with NAVSEA Technical Publication S9074-AQ-GIB-010/248 Figure 21. Physical Requirements: * Lift and carry heavy items weighing up to 50 pounds. * Stand Kneel Bend Stoop move in and around confined and cluttered places and uneven areas see and hear naturally or with correction. * Full range of motion and flexibility consistent with requirements of the job duties. * Requires using hands to handle control or feel objects tools or controls according to a set procedure. * Requires repetitive movement. * Climb and maintain balance on steel framework stairs ladders and scaffolds. * Work up to a 12-hour shift doing hard physical labor in varying temperature extremes and other outside conditions. Work Environment: * Typical construction site environment * Requires working in cramped workspaces and getting into awkward positions. * Requires working in very hot (above 90 F degrees) or very cold (below 32F degrees) temperatures and exposure to inclement weather such as dust wind snow rain etc. * Requires working in extremely bright or inadequate lighting conditions * Includes exposure to sounds and noise levels that are distracting or uncomfortable. * Work around hazardous equipment.
Company Industry
Glass / Ceramics and Concrete Manufacturing / Law Enforcement / Commercial and Service Industry Machinery Manufacturing
Key Skills
- Robot Programming
- Calipers
- ASME Codes & Standards
- Flux Welding
- Plasma Cutting
- MIG Welding
- 3G
- Fabrication
- Welding
- Geometry
- Manufacturing
- 4G/LTE
